Tuesday, 14 November 2017

Digital Electric Oven? Maybe New For You! What Do They Do?




There are many types of oven that exist in this world. People would just say "oven" in their normal daily-lives conversation. But you should know which type of oven they are talking about. Either electric, gas, built-in, double, microwave or brick oven, they are different. When those type of oven divided into few below them, the minor type can be shown as digital or analog.



What Is Digital Electric Oven?

Digital electric oven is a type of oven that is electronically using digital control as the interface instead of the ones that are using manual timer or analog buttons.



How Can Digital Electric Oven be Different from Other Ovens?

Depends on the type of oven, the digital electric ones can be really easy to control. Digital oven is very high accuracy unlike analog interface type of oven that people usually just set them in minutes while in digital you can set them in seconds timer too. That's how accurate the digital type are.




Digital Electric Oven EKF 311 D UD

EKF 311 D UD oven is a 3-trays EKA branded oven selling in our company, CN United, that has direct steam feature as an option to a customization cooking with 10 levels controlled by digital panel. It can provide customers with ready meals or prepare quick deli recipes.

One of the main feature of this oven is it has a programmable delayed start feature that grants you ability to decide beforehand what time you want to cook for your dishes.

To save your kitchen space, this oven has stackable feature too. It installed with IPX3 type of water protection from spraying water.


Where Can I Find More Information About This Oven?

There many websites out there that provide the information about oven. But for this EKF 311 D UD oven, you can visit this page and you can find the information such as features and specifications there. 

For more information about this product, email sales@cnunited.com.my



Wednesday, 25 October 2017

Multi-functional Oven - Make Your Life Easier with EKA, EKF 423 M.



EKA

Searching for a high-quality oven with multifunctional features? Our company, C&N United Corporation Sdn. Bhd. has the answer for it. We as Eka Italy Distributor in Malaysia, have imported this EKF 423M - Multifunction Oven available for you. Eka, a company in Italy introduced a compact-sized oven with loads of features packed into it. 






EKF 423 M

EKF 423 M is a code that tells us, EKF (means Evolution EKA Oven) with 4 trays, 429 x 345 mm dimensions and Multifunction according to Eka website. 

Featured with forced cooling system of inner parts and inspectionable glass tilt door, this oven is a must for bakery and pastry business. 

To conserve the space in your kitchen, this item is made stackable. Elegant yet professional black-silver design enhances the surrounding visual of your kitchen and thus improves the user's mind.


SPECIFICATIONS

EKF 423 M is protected with IPX3 standard of water protection which states that "protected against spraying water". This oven is electric-powered and using thermostat for the temperature control.





MULTIFUNCTION

Multifunctional oven is useful for you to be able to choose the best cooking style for your each of your foods. This including conventional cooking which considered without a fan and fan cooking. 

Defrost option is also represented by the multifunctional oven similar function like microwave but not as quick as microwave. 

Besides, it makes your way of cooking easier with safe way of fan-assisted grilling and also there will require no process of moving the shelves around (you can cook two or three shelves) makes baking much faster.




The way of multifunctional type of oven cooking is considered making your life easier compared to the common type of ovens. More specifications about this oven can be found in the link below:



Here you can find some kitchen equipment promotions from our company. Check this link http://cnunited.com.my/promo.php

Any enquiry contact us http://cnunited.com.my/contact.php




You can find us here:





Wednesday, 2 December 2015

AISI 304 (SUS 304) Grade Stainless Steel
Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel.

Corrosion Resistance
304 has excellent corrosion resistance in a wide variety of environments and when in contact with different corrosive media. Pitting and crevice corrosion can occur in environments containing chlorides. Stress corrosion cracking can occur at temperatures over 60°C.

Heat Resistance
304 has good resistance to oxidation in intermittent service up to 870°C and in continuous service to 925°C. However, continuous use at 425-860°C is not recommended if corrosion resistance in water is required. In this instance 304L is recommended due to its resistance to carbide precipitation.

Where high strength is required at temperatures above 500°C and up to 800°C, grade 304H is recommended. This material will retain aqueous corrosion resistance.

Fabrication
Fabrication of all stainless steels should be done only with tools dedicated to stainless steel materials. Tooling and work surfaces must be thoroughly cleaned before use.
These precautions are necessary to avoid
cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.



Type 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans.

Type 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. Some products such as plate and pipe may be available as “dual certified” material that meets the criteria for
both 304 and 304L. 304H, a high carbon content variant, is also available for use at high temperatures.


Applications
304 stainless steel is typically used in:

·         Sinks and splashbacks
·         Saucepans
·         Cutlery and flatware
·         Architectural panelling
·         Sanitaryware and troughs
·         Tubing
·         Brewery, dairy, food and pharmaceutical production equipment
·         Springs, nuts, bolts and screws
·         Medical implants

Typical chemical composition
%
304
304L
304H
C
0.08 max
0.03 max
0.10 max
Mn
2.0
2.0
2.0
Si
0.75
0.75
0.75
P
0.045
0.045
0.045
S
0.03
0.03
0.03
Cr
18-20
18-20
18-20
Ni
10.5
12
10.5
N
0.1
0.1
-

Typical Mechanical Properties
Grade
304
304L
304H
Tensile strength
520
500
520
Compression
Strength (MPa)
210
210
210
Proof Stress
0.2% (MPa)
210
200
210
Elongation A5 (%)
45
45
45
Hardness
Rockwell B
92
92
92

Typical Physical Properties
Property
Value
Density
8.00 g/cm3
Melting Point
1400-1450°C
Modulus of Elasticity
193 GPa
Electrical Resistivity
0.072x10-6 Ω.m
Thermal Conductivity
16.2 W/m.K at
100°C
Thermal Expansion
17.2x10-6 /K at
100°C


Alloy Designations
Stainless steel 304 also corresponds to the following standard designations and specifications:

Euronorm
UNS
BS
En
Grade
1.4301
S30400
304S15
304S16
304S31
58E
304
1.4306
S30403
304S11

304L
1.4307
-
304S11

304L
1.4311
-
304S11

304L
1.4948
S30409
304S51

304H



Cold Working
304 stainless steel readily work hardens. Fabrication methods involving cold working may require an intermediate annealing stage to alleviate work hardening and avoid tearing or cracking. At the completion of fabrication a full annealing operation should be employed to reduce internal stresses

Hot Working
Fabrication methods, like forging, that involve hot working should occur after uniform heating to 1149-1260°C. The fabricated components should then be rapidly cooled to ensure maximum corrosion resistance.

Heat Treatment
304 stainless steel cannot be hardened by
heat treatment. Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

Machinability
316 stainless steel has good machinability. Machining can be enhanced using the following rules:

·         Cutting edges must be kept sharp. Dull edges cause excess work hardening.
·         Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.
·         Chip breakers should be employed to assist in ensuring swarf remains clear of the work
·         Low thermal conductivity of austenitic alloys results in heat concentrating at the cutting edges. This means coolants and lubricants are necessary and must be used in large quantities.

Welding
Fusion welding performance for type 304 stainless steel is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel. For 304L the recommended filler is 308L. Heavy welded sections may require post-weld annealing. This step is not required for 304L. Grade 321 may be used if post-weld heat treatment is not possible.

Supplied Forms
304 stainless steel is typically supplied by
Tecni-Cable Ltd in the following forms:

·         Fittings
·         Cable tools & accessories

Disclaimer
This information is based on our present knowledge and is given in good faith. However, no liability will be accepted by the Company is respect of any action taken by any third party in reliance thereon As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for  any particular purpose. Any advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.

Credit to : http://www.tecni-cable.co.uk/

Monday, 15 June 2015

About Us - CN United

Established in 1999, C&N United Corporation Sdn Bhd is one of the top kitchen equipment suppliers in Malaysia. Since the beginning, the corporation is committed to supply comprehensive range of high quality products of assorted price range, as well as imported brands from Taiwan, Italy and USA. Our ‘all-in-one’ store brings convenience to our clients as they do not have to search for different equipment from different suppliers. C&N United provides refrigeration and bakery equipment to hotels, food preparation equipment and cutleries to restaurants, stainless steel utensils and packaging machine to aboratories and many other products under one roof.

What makes us different from the other is that we are the only supplier cum manufacturer in Malaysia. Our very own manufactory is located in Shah Alam, where our dedicated, highly skilled team design and fabricate various kitchen equipment, and provide consultation for customized requirements. Here, we also offer professional service and total solution for new setting up and remodeling of commercial kitchen, hypermarket and retail for customers.

As a one stop solution to all your needs in commercial kitchen and food services industry, C&N United is expanding the business to a whole new level. We will soon have our C&N Showroom in Australia and C&N physical office in China.

Digital Electric Oven? Maybe New For You! What Do They Do?

There are many types of oven that exist in this world. People would just say "oven" in their normal daily-lives conversation....